Jamaican Black Castor Oil

Overall this is a good product that works well. However. I did not find fitting very easy compared to fitting the equivalent item for my 11 inch iPad Pro a couple of years ago. I was successful in the end. though..Here are some tips I found useful. listed in the order they were employed..- I discarded the frame after attempts to use it did not lead to the screen protector going on straight. With careful effort. I was eventually able to align the protector properly. There should be about 0.5mm of the iPad’s screen left clear around each edge when the alignment is correct..- Holding the corner of the protector firmly in place with a thumb. I very slowly lowered it to let it cover the screen as gradually as possible..- I found that the key point is to prevent bubbles forming in the first place. rather than trying to eliminate them later. The latter is difficult to do completely. If one formed. I slightly lifted the protector until it disappeared. and then pressed firmly when re-attaching the protector to the area where the bubble had been..- If after you have let the whole protector drop into place and still see bubbles (or dust). I found a way to lift it free without damage is very gently. using a fingernail. by the notch cutout rather than a corner. The nearly 90o angle of the notch helps get a grip here..Once fitted properly. this screen protector becomes almost unnoticeable. and does not impede use of the iPad at all.